top of page

GE Washer - Leaking Water

7 minutes ago
1 min read

Model: PFW870SPV0RS

Location: Ave Maria, FL 34142


Repair Summary

Checked washer for customer complaint of leaking water. Upon arrival, inspected the door diaphragm and found no tears, damage, or abnormalities. Customer expressed concern regarding a V-shaped indentation in the diaphragm. Explained that this indentation is part of the manufacturer's original design and is not a defect. Performed multiple diagnostic tests to identify any possible source of leakage. Filled the washer to its maximum allowable water level and allowed the water to remain in the tub for an extended period while inspecting for leaks. No leaks were observed. Inspected the detergent dispenser area and verified there was no water escaping. Also checked the vent assembly and confirmed it was opening and closing properly. Found a couple of stored inverter-related error codes; however, the washer successfully passed its self-diagnostic tests without any operational issues.


Tilted the washer backward and thoroughly inspected the underside, including accessible hoses, connections, and surrounding components. No evidence of active water leakage was found anywhere on the unit. Educated customer on proper load sizes, cycle selection, and avoiding overloading to help maintain normal washer operation. Advised customer to continue monitoring the washer and, if the leaking condition occurs again, record a video showing the laundry load, selected wash cycle, and location of the water leak to assist with further diagnosis. At this time, the reported leaking condition could not be duplicated, all diagnostic tests passed, and the washer checks normal.



 
 
bottom of page