top of page

Amana Washer - Not Stopping During Spin Cycle

Oct 7
1 min read

Model: NTW4519JW2

Location: Lehigh Acres, FL 33971


Repair Summary

Checked washer for not stopping during the spin cycle. Upon inspection, found an F0E7 error code indicating an oversudsing condition. Checked the drain pump and found it operating properly. Customer stated she had been washing a comforter/blanket in the washer. Advised the customer that the manufacturer does not recommend washing comforters, rugs, or similar bulky items in this washer because they can cause excessive imbalance and prevent the unit from spinning properly. Also advised the customer to run a Clean Washer cycle with Affresh approximately once a month for maintenance. Replaced the water inlet valve due to well-water conditions, replaced the suspension components due to damage caused by the bulky load, and replaced the main control board due to the pressure-sensing circuit indicating an excessively high water level. Calibrated the washer and ran diagnostics. Uploaded video showing the diagnostic test and verified all functions are operating properly with no additional issues. Unit checks normal at this time.



 
 
bottom of page