top of page

GE Dryer - Not Heating Properly

2 days ago
1 min read

Model: GTD58EBPV0DG

Location: Immokalee, FL 34142


Repair Summary

Customer’s complaint is that the dryer intermittently stops heating properly. Customer stated that another service company had visited approximately three times and replaced multiple components without resolving the issue. Customer also reported that unplugging the dryer and plugging it back in temporarily restores normal operation before the heating issue returns. Upon inspection, discovered significant heat damage and evidence of electrical arcing at the dryer’s power cord connection, indicating a potentially unsafe electrical condition. Operated the dryer during testing and confirmed that it was functioning and producing heat at that time. Uploaded a video documenting the dryer’s operation and findings. Customer also stated that the dryer exhaust vent had been professionally cleaned approximately three months ago.


Advised the customer that the damaged power cord and suspected faulty wall receptacle present a serious electrical and fire hazard. Recommended that a licensed electrician inspect the electrical supply, replace the damaged wall receptacle as necessary, and ensure the dryer power cord is replaced before further operation. Explicitly instructed the customer not to use the dryer until the electrical issues have been corrected and the connections verified safe. Explained that the intermittent heating concern may be related to the compromised electrical connection rather than an internal dryer component failure. No internal appliance repairs were performed during this visit. Further operation and testing should only occur after the electrical safety concerns have been resolved.



 
 
bottom of page