top of page

GE Fridge - Broken Leveling Foot

Nov 12
1 min read

Model: ZIC303NPPBII

Location: Naples, FL 34105


Repair Summary

Checked refrigerator for broken leveling feet. Upon inspection, found the riveted threaded mounting point for the leveling foot had broken away from the frame, leaving no threaded connection to secure the leveling foot. Coordinated with the installation crew to pull the refrigerator out and position it on its side for further inspection. Found that two additional mounting brackets and bolts were inaccessible without removing components from underneath the refrigerator and removing the side panel. Proposed an alternative repair using two washers and two locking nuts to securely retain the leveling foot and provide a more secure mounting point than the original riveted connection. Customer was not satisfied with the proposed repair and declined to proceed. Fuse will coordinate directly with the customer regarding an alternative solution they had previously discussed.


The leveling foot can be secured using two washers and two locking nuts, allowing the refrigerator to be properly leveled. However, this repair was not completed due to the customer's decision to decline. While on-site, completed the applicable service bulletin by clipping the left drain tube to help relieve excessive suction on the fresh food door. Photos attached documenting the findings and completed service bulletin. Leveling foot repair remains unresolved pending further coordination between Fuse and the customer.



 
 
bottom of page