GE Range - F350 Error Code / Failure To Heat
Model: CES700P2M3S1
Location: Cape Coral, FL 33914
Repair Summary
Checked oven for a reported F350 error code and failure to heat properly. Tenants stated the oven would display the error and stop heating. Upon inspection, attempted to preheat the oven to 350°F. At approximately 315°F, the oven displayed a 350 bake fault message, followed by the control board resetting. Although this is not a published error code, further review of the technical documentation indicated an issue with the cooling fan operation or communication. Verified the cooling fan was not operating and no airflow was present, allowing internal components to overheat. Determined the cooling fan and sensor required replacement. Ordered parts for repair.
Returned and replaced the cooling fan and sensor. Initiated a bake cycle at 350°F and verified the cooling fan activated at approximately 200°F with proper airflow. Continued monitoring the oven as it heated beyond the temperature at which the original failure occurred. Allowed the unit to operate for an additional five minutes and confirmed no error codes returned or control board resets occurred. Oven is now heating properly, cooling fan is functioning as designed, and unit checks normal at this time.





