LG Washer - Low Water Pressure / Slow Filling
Model: WT8200CW
Location: Fort Myers, FL 33967
Repair Summary
Checked washer for customer complaint of low water pressure and slow filling. Upon inspection, found a defective water inlet valve assembly. Replaced the valves and tested operation. Although water flow improved, the washer continued filling very slowly, taking over 10 minutes to reach the proper water level. Checked the incoming water supply at the hoses and confirmed water was available with adequate flow. Customer is on a well water system. Determined that the replacement valve was not operating properly and ordered another water inlet valve assembly.
Returned and replaced the defective water inlet valve with a new assembly. Started a wash cycle and initially observed reduced water flow. After approximately one minute, the washer had reached the proper wash water level, confirming improved filling performance. Checked both hot and cold water supplies and found similarly reduced pressure from the home's plumbing. Informed customer that the household water pressure appears somewhat low and may affect filling performance. Washer is now filling and operating properly, and all checks are normal at this time.





