Maytag Dryer - No Heat & Power Loss
Model: MED6500MW0
Location: Lehigh Acres, FL 33976
Repair Summary
Checked dryer for not heating properly and a reported loss of power. Upon arrival, unplugged the dryer and verified proper 240 VAC at the outlet. Plugged the dryer back in and power was restored at the terminal block. Started a cycle and verified the drum was turning and the heater was cycling; however, the dryer was becoming excessively hot, indicating restricted airflow. Advised the customer to have the household dryer vent professionally cleaned. Also duplicated a loud knocking noise and, upon disassembly, found the drive belt tearing with loose pieces striking the cabinet; photo attached. Installed a dryer repair kit including a new belt, idler pulley, and drum rollers. During a final inspection for burnt wiring or electrical shorts, found the dryer had been wired incorrectly with the neutral bonded to ground. Corrected the wiring and advised the customer that the improper connection may have contributed to the reported power concern. Tested operation after repairs and verified the dryer is operating properly at this time; external vent cleaning is still recommended.



