Maytag Washer - Not Starting Cycle
Model: MVW7232HW1
Location: Cape Coral, FL 33991
Repair Summary
Checked washer for not starting a cycle. Upon arrival, found the lid strike had broken and become lodged in the lid latch assembly, causing damage to the latch. Replaced the latch assembly; however, the replacement lid strike was not available at the time of service. Briefly tested the new latch by manually pulling it forward to simulate a locked lid and verified proper latch operation. Also found a stored error code related to water pressure. Verified the home water pressure is good, but due to the error and the washer using a four-solenoid inlet valve, replaced the water inlet valve assembly. Advised the customer that the replacement lid strike will need to be installed and showed them how to twist and lock it into place. Customer understood. If the customer is not home, the strike can be left at the front door for installation. Other than the missing lid strike, all tested components are operating properly. Unit checks normal at this time.



