top of page

Maytag Washer - Not Starting Wash Cycle

Nov 5
1 min read

Model: MTW4205SW1

Location: Lehigh Acres, FL 33974


Repair Summary

Checked washer for not starting a wash cycle. Customer stated that the unit was approximately one week old and would not initiate a cycle. Upon arrival, noticed that the wall-mounted water supply valve was leaking and the water supply connection appeared questionable. Tested washer operation and performed a complete diagnostic cycle, which passed with no errors or mechanical issues detected. Determined that the starting issue was due to improper operation, as the customer was not holding the Start button long enough to initiate the cycle.


Educated the customer on proper washer operation and demonstrated the correct procedure for starting a wash cycle. Had the customer personally initiate a cycle to confirm understanding and proper operation. Recorded supporting video documenting the washer functioning correctly. Advised customer of the leaking wall-mounted water valve, which requires attention. No appliance repairs were necessary. Unit checks normal at this time.



 
 
bottom of page