top of page

Samsung Dryer - Not Drying Properly

Nov 6
1 min read

Model: DVE54CG7150DA3

Location: Lehigh Acres, FL 33971


Repair Summary

Customer reported that the dryer was not drying clothes properly and required multiple cycles to complete drying. Upon arrival, tested the dryer and verified that the heating system and other components were operating correctly. Performed an exhaust vent airflow inspection and measured static pressure at 1.12, significantly exceeding acceptable tolerance levels and indicating a severe vent restriction. Disconnected the exhaust vent and discovered water accumulation inside the ductwork, further confirming improper airflow and a severely restricted vent. Video documentation was obtained.


With the exhaust vent disconnected, connected HASS and performed diagnostic testing, which passed with no issues detected. Confirmed that the dryer itself is operating according to manufacturer specifications and that the drying performance issue is caused by the restricted external ventilation system. Advised the customer to discontinue using the dryer until the entire exhaust vent system has been professionally cleaned and inspected to prevent potential appliance damage, overheating, or fire hazards. Dryer checks normal with the exhaust vent disconnected.



 
 
bottom of page