Samsung Dryer - Not Drying Properly
Model: DVE45R6300V/A3
Location: Cape Coral, FL 33904
Repair Summary
Customer’s complaint is that the dryer is not drying clothes properly on the automatic sensor drying cycles and only dries effectively when using Timed Dry. Upon inspection, connected the dryer to Samsung HASS and performed diagnostic testing. The door switch test passed successfully; however, when advancing to the moisture sensor test, the sensor failed to respond when touched, preventing the diagnostic sequence from continuing. Determined that the moisture sensor assembly was defective and affecting the automatic drying cycles. Manually tested the dryer using Timed Dry with Eco mode disabled and confirmed that the heating system was cycling properly, reaching approximately 165°F. Also noted that the dryer has a side-vented exhaust configuration and is installed in an extremely confined space.
Returned and installed the new filter and moisture sensor housing assembly. Reconnected the dryer to Samsung HASS and performed an overall diagnostic inspection. The dryer successfully passed all diagnostic test modes, including the moisture sensor test. Verified that the Sensor Dry cycles are now functioning properly and confirmed that the heating system continues to cycle correctly, reaching approximately 165°F. All tested functions are operating within manufacturer specifications at this time. Repair completed successfully.



