top of page

Samsung Range - Display No Power

Nov 4
1 min read

Model: NX60A6751SS/AA

Location: Fort Myers, FL 33966


Repair Summary

Checked gas range for the display not powering on. Customer stated that the oven shut off during an Air Fry cycle and the display went completely blank. Inspected the unit and found a shorted main control board, which caused the rear safety thermostat to trip and interrupt power to the controls. Replaced the electronic control components and touch membrane. Ordered a replacement safety thermostat to complete the repair and perform additional Air Fry testing.


Returned and replaced the rear safety thermostat. Tested the oven using Air Fry mode at 425°F and observed temperatures exceeding 500°F. Stopped testing and contacted manufacturer technical support, who advised that elevated temperatures during Air Fry operation can be normal. Adjusted the replacement thermostat as directed by technical support to help prevent another thermal cutoff. Advised customer to monitor the oven during operation. Per technical support, if the thermostat fails again, technical support must be contacted before scheduling another service visit, as the issue may be related to cabinet installation or ventilation conditions. Customer was informed of the findings and recommendations.



 
 
bottom of page