top of page

Samsung Washer - Continuously Filling

Nov 2
1 min read

Model: WF45B6300AP/US

Location: Fort Myers, FL 33907


Repair Summary

Checked washer for continuous water filling. Entered service mode and attempted diagnostic testing. Water continued filling even after advancing past the water pressure test. Shut off the water supply and disconnected the wiring harness from the inlet valves, but water continued flowing, confirming the valves were mechanically stuck open. Also noticed excessive noise during the spin cycle, indicating worn bearings. Educated customer on proper cycle selection, load sizes, and washer care.


Returned and replaced the water inlet valves. Repeated diagnostic testing and demonstrated to the customer that the valves now shut off properly without manually closing the water supply. Verified no leaks or error codes. Unit checks normal at this time.



 
 
bottom of page