Samsung Washer - No Water Entering Unit
Sep 23
1 min read
Model: WF45B6300AC/US
Location: Cape Coral, FL 33909
Repair Summary
Checked washer for little to no water entering the unit. Powered on the washer and confirmed water was entering but at an extremely slow rate. Removed both hot and cold water supply hoses and verified strong water pressure from the home supply. Further inspection found the hot and cold water inlet valve solenoids were not opening completely, restricting water flow into the washer. Replaced both hot and cold water inlet valves and secured the drain hose with a zip tie. Connected HASS and ran diagnostic testing, which completed successfully. Verified proper water flow and checked for leaks; none detected. Unit is operating as designed at this time.





