Samsung Washer - Noise & Intermittently Not Completing Spin Cycle
Model: WA45T3200AW/A4
Location: Fort Myers, FL 33913
Repair Summary
Checked washer for water noise in the tub and intermittently not completing the spin cycle. Customer stated she hears water remaining in the tub and sees water coming through the basket holes onto the clothing during the spin cycle. Explained that a small amount of water normally remains in the bottom of the outer tub and that the drain pump is positioned near the floor while the drain standpipe is elevated, making this residual water normal. Also explained that the spin basket contains oil and counterweights within the upper balance ring, which can create a water-like sound during operation and is part of the washer's normal balancing system. Customer also reported the washer occasionally pauses or does not complete the spin cycle but stated no error codes are displayed. Connected HASS and found no stored error codes. Inspected the suspension and found proper tension, verified good water pressure, and inspected the underside with no damaged components or oil residue found. Belt was properly tensioned and operating normally. Ran the washer through multiple portions of the cycle and verified it fills, agitates, drains, and spins properly with no issues observed. Uploaded videos documenting operation. Educated the customer on proper use and care, including appropriate load sizes, cycle selection, and items that should not be washed in the unit. Although the intermittent spin issue could not be duplicated today, this is consistent with a previous repair involving an intermittent sensor/communication issue on another unit with the same symptoms. To help prevent a repeat callback, replaced the main control board. Retested the washer and verified proper operation. Unit checks normal at this time.






