top of page

Whirlpool Dryer - No Heat

Nov 13
1 min read

Model: WGD6620HW3

Location: Fort Myers, FL 33913


Repair Summary

Checked dryer for customer complaint of no heat. Upon arrival, checked exhaust vent static pressure and verified proper airflow with no restrictions. Ran a timed dry cycle, and the dryer operated normally for approximately 10–15 minutes. After adding a towel to the drum, the dryer stopped calling for heat while continuing to tumble. Determined that replacement of the thermostat and related components was necessary. Ordered the required parts, as the components available on the service vehicle were not compatible. Upon returning, installed all ordered components except the igniter, which arrived damaged. Further testing revealed intermittent ignition, with the dryer heating sporadically. Reordered the igniter to complete the repair.


Returned and installed the new igniter, verifying all electrical connections were properly secured. Reassembled the dryer and performed operational testing. Confirmed the dryer is now igniting consistently, heating properly, and cycling through its cool-down period as designed. All required sensors and the igniter have been replaced. Informed customer of the completed repairs and verified proper dryer operation. No additional issues were found, and all checks are normal at this time.



 
 
bottom of page