Whirlpool Washer - Noisy / Not Completing Cycle
Model: WTW4957PW0
Location: Cape Coral, FL 33909
Repair Summary
Customer’s complaint is that the washing machine was making excessive noise and would not complete the spin cycle. Connected the washer to diagnostics and found one stored error code for an off-balance condition. Inspected the suspension rods and confirmed they were secure and functioning properly. Further inspection revealed excessive vertical movement in the wash basket. When manually lifting the basket, significant up-and-down play was present, indicating a stripped basket hub. Determined that the hub assembly required replacement. Also identified a manufacturer service bulletin addressing the pressure switch issue, requiring replacement of the main control board.
Replaced the defective basket hub with the upgraded metal hub assembly and installed a new main control board in accordance with the manufacturer service bulletin. Ran the washer through a complete diagnostic test and verified proper hot and cold water filling, agitation, draining, and spin operation. All functions completed successfully with no abnormal noises or spin issues observed. Educated customer on proper cycle selection and recommended using the Deep Water Wash setting for their typical medium to large laundry loads. Advised using Auto Sensing primarily for smaller loads. Washer is now operating properly, and all checks are normal at this time.









