Whirlpool Washer - Not Completing Cycle
Model: WFW5605MW1
Location: Fort Myers, FL 33913
Repair Summary
Checked washer for not completing the cycle. Upon arrival, washer was displaying an F9E1 error code indicating a long drain, and the tub was full of water. Attempted to cancel the cycle and drain the water, but the drain pump was receiving proper voltage with no water movement. Inspected the drain pump assembly and found no significant debris or obstruction in the catch filter or pump. Motor resistance tested within range, but the pump was not operating properly, indicating an internal pump failure. Replaced the drain pump assembly, cleared the error codes, and tested the washer. Verified the washer fills, agitates, drains, and spins properly with no errors or leaks. Unit checks normal at this time.





