Whirlpool Washer - Stopping During Drain And Spin Cycle
Oct 7
1 min read
Model: WFW560CHW4
Location: North Fort Myers, FL 33917
Repair Summary
Checked washer for stopping during the Drain and Spin cycle. Upon arrival, ran diagnostics and found an F8E1 error code, along with a stored drain pump error. Ran the washer through the diagnostic cycle and found it operating properly at the time of service. Advised the customer that although the washer was currently operating, the stored drain pump error could indicate an intermittent issue with the pump. At the customer's request, replaced the drain pump. Retested the washer and verified there are no additional error codes and the washer is operating properly. No leaks found. Unit checks normal at this time.





