Whirlpool Washer - Water Leak & Basket Lower
Model: WTW4816FW3
Location: Cape Coral, FL 33904
Repair Summary
Checked washer for a one-time water leak and the basket dropping lower than normal. Upon arrival, found a larger-than-normal gap between the basket assembly and the top frame. The suspension rods felt tight but had resistance when returning the tub to its proper position. Replaced the suspension rods and properly leveled the washer so the tub is centered within the frame. Suspect the tub position may have allowed water to miss the tub area and leak down the backside during a full cycle. Inspected for other possible sources of leakage and found no evidence of additional issues. Tub is not cracked, drain hose is in good condition, and the pressure switch hose is properly attached. Ran a factory calibration and tested operation. Washer is holding water properly with no leaks detected. All other components check normal. Unit checks normal at this time.



