Samsung Dryer - Cycle Not Starting

Model: DVG45T6000W/A3

Location: Estero, FL 33928

Repair Summary

Checked dryer for being unable to start a cycle. Customer stated the dryer displayed a 3C error code related to the motor centrifugal switch. Upon arrival, held the door switch down and rotated the drum by hand. Verified the centrifugal switch clicked and released properly. Started a cycle and confirmed the drum rotated, the dryer cycled heat properly, and airflow through the ventilation was good. Applied resistance to the drum by holding a baffle while it was spinning and verified the motor continued running without issue. Based on the customer’s description, the intermittent issue may be related to either the main control board/relay or the motor assembly. Unable to duplicate the reported failure at this time. Customer will continue to monitor and attempt to obtain a video if the issue returns. Unit checks normal at this time.

• 

•